Optimization of water quality evaluation index using information sensitivity method and variable fuzzy model for the...

The more water quality evaluation indicators, the greater the amount of water quality evaluation calculation. Under the requirements of evaluation accuracy, the index screening method is usually used to optimize water quality evaluation index to reduce the calculation amount of water quality evaluation. Taking Mengcheng Gate of Guo River as an example, the information sensitivity index screening method was used to simplify the water quality evaluation index system from 17 to 12 indicators. The variable fuzzy comprehensive evaluation method was used to compare and evaluate the original index system and the optimal index system. The results showed that the water quality results of the optimal index system are consistent with the original index evaluation results. And the water quality of Mengcheng Gate is basically stable at class I level. The information sensitivity method reduced the number of indicators by 29.41%. The error between the water quality evaluation results based on the optimal indicators and the original indicators is less than 10%. The maximum error, minimum error, and average error are 8.92%, 0.08%, and 2.46%, respectively. It revealed that the information sensitivity method can eliminate the information redundancy while retaining the information of the original index system. It can also reduce the calculation amount of water quality evaluation in the future. The variable fuzzy comprehensive evaluation method can reasonably reflect the complex nonlinear relationship between water quality index and water quality category. This accuracy has practical significance for guiding the optimization of water quality evaluation index system, improving the efficiency of water quality evaluation. This model provides a scientific basis for indicator selection methods in similar river water quality evaluations.