Scaled Production of Functionally Gradient Thin Films Using Slot Die Coating on a Roll-to-Roll System

Polymer thin films with a cross-web gradient structure is a burgeoning area of research, having received more attention in the last two decades, for improvements in the performance and material properties. Such patterned films have been fabricated using several techniques, but in practice these techniques are non-scalable, material-dependent, wasteful, and not highly efficient. Slot die coating, a well-known scalable manufacturing process, is used to fabricate gradient polymer thin films which will be investigated herein. By incorporating slot die with the custom roll-to-roll imaging system, gradient thin films are successfully fabricated by forcing two fluidic materials into the slot die simultaneously and by manipulating the viscous, diffusive, and inertial forces. The materials will be allowed to intermix, with the aim of having approximately a 50% mix along the centerline of any two contiguous stripes. Moreover, several characterizations such as FTIR, UV-vis spectroscopy, and SEM are performed to assess the quality of the gradient polymer thin films. The gradient structure fabricated using functional and nonfunctional materials has successfully improved the functional properties compared to fully blended two materials. This work will provide an understanding of the mechanisms to obtain gradient polymer thin-film structures that exhibit the desired geometric structure and performance.