Fabrication of NiFe-LDHs Modified Carbon Nanotubes as the High-Performance Sulfur Host for Lithium-Sulfur Batteries

Lithium-sulfur batteries offer the potential for significantly higher energy density and cost-effectiveness. However, their progress has been hindered by challenges such as the "shuttle effect" caused by lithium polysulfides and the volume expansion of sulfur during the lithiation process. These limitations have impeded the widespread adoption of lithium-sulfur batteries in various applications. It is urgent to explore the high-performance sulfur host to improve the electrochemical performance of the sulfur electrode. Herein, bimetallic NiFe hydroxide (NiFe-LDH)-modified carbon nanotubes (CNTs) are prepared as the sulfur host materials (NiFe-CNT@S) for loading of sulfur. On the one hand, the crosslinked CNTs can increase the electron conductivity of the sulfur host as well as disperse NiFe-LDHs nanosheets. On the other hand, NiFe-LDHs command the capability of strongly adsorbing lithium polysulfides and also accelerate their conversion, which effectively suppresses the shuttle effect problem in lithium polysulfides. Hence, the electrochemical properties of NiFe-CNT@S exhibit significant enhancements when compared with those of the sulfur-supported pure NiFe-LDHs (NiFe-LDH@S). The initial capacity of NiFe-CNT@S is reported to be 1010 mAh g^-1. This value represents the maximum amount of charge that the material can store per gram when it is first synthesized or used in a battery. After undergoing 500 cycles at a rate of 2 C (1 C = 1675 mA g^-1), the NiFe-CNT@S composite demonstrates a sustained capacity of 876 mAh g^-1. Capacity retention is a measure of how well a battery or electrode material can maintain its capacity over repeated charge-discharge cycles, and a higher retention percentage indicates better durability and stability of the material.