Related Experiment Video

Updated: Jul 3, 2025

Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique
10:28

Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique

Published on: March 24, 2023

1.1K

An Improved Theory for Designing and Numerically Calibrating Circular Touch Mode Capacitive Pressure Sensors

Xiao-Ting He1,2, Xin Wang1, Fei-Yan Li1

  • 1School of Civil Engineering, Chongqing University, Chongqing 400045, China.

Sensors (Basel, Switzerland)
|February 10, 2024
PubMed

Keywords:
analytical solutioncapacitive sensorcircular conductive membranenumerical calibrationpressure sensortouch mode of operation

More Related Videos

Author Spotlight: Microfluidic Channel-Based Soft Electrodes and Their Application in Capacitive Pressure Sensing05:57

Author Spotlight: Microfluidic Channel-Based Soft Electrodes and Their Application in Capacitive Pressure Sensing

Published on: March 17, 2023

2.2K
Dynamic Multiparameter Platelet Function Assessment Using a Capacitive Biosensor06:32

Dynamic Multiparameter Platelet Function Assessment Using a Capacitive Biosensor

Published on: May 2, 2025

251

Related Concept Videos

Design Example: Resistive Touchscreen01:14

Design Example: Resistive Touchscreen

A device engineer plays a crucial role in designing user interfaces for mobile devices. One such interface is the resistive touchscreen, which fundamentally consists of two metallic layers: a flexible upper layer and a rigid lower layer, separated by a narrow gap. The high resistance between these two layers is a key characteristic of this design.
When a user touches the screen, the two layers make contact at a specific point known as the touchpoint. This contact reduces the resistance between...
313
Design Example: Capacitance Multiplier Circuit01:20

Design Example: Capacitance Multiplier Circuit

In integrated circuit technology, a capacitance multiplier is often utilized to produce a larger capacitance value when a small physical capacitance falls short. This is achieved by a circuit that multiplies capacitance values by a factor of up to 1000, such that a 10-pF capacitor can replicate the performance of a 100-nF capacitor.
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
775
Design Example01:23

Design Example

The innovation of touch-tone telephony revolutionized the telecommunications industry by replacing the traditional rotary dial with a dual-tone multi-frequency (DTMF) signaling system. This system uses a matrix-style keypad with buttons arranged in four rows and three columns, creating 12 distinct signals each assigned to a pair of frequencies. Each button press results in a simultaneous generation of two sinusoidal tones – one from a low-frequency group (697 to 941 Hz) and one from a...
329