Prediction of phase composition and mechanical properties Fe-Cr-C-B-Ti-Cu hardfacing alloys: Modeling and...

Alloys of the Fe-Cr-C-B-Ti alloy system are characterized by brittleness, which can be eliminated by the copper alloy, while corrosion resistance and abrasive wear resistance are significantly reduced. In this article, comprehensive investigations are carried out on the microstructure and mechanical properties of the proposed high-copper boron-containing alloy 110Cr4Cu7Ti1VB. Systematic theoretical and experimental studies encompassed thermodynamic calculations in ThermoCALC, production of flux-cored wires for hardfacing and welding, receipt of SEM images, acquisition of load and unload diagrams (discharge) via instrumental indentation on various phases of the deposited metal, and determination of chemical composition at indentation points through local chemical analysis. Mechanical properties of some phases such as γ-Fe phase (austenite), hemioboride Fe₂(В,С) and boron cementite Fe₃(В,С) and titanium carbide TiC in Fe-Cr-C-B-Ti-Сг alloy were determined by using density functional theory (DFT) implemented in the CASTEP code. We also compared these compounds; properties with other available commercial compounds, where available. With the knowledge of calculated elastic constants, the moduli, the Pugh's modulus ratio G/B, the Poisson's ratio v and the hardness of the title phases, 110Cr4Cu7Ti1VB were further predicted and discussed.