Enhancing the PEC Efficiency in the Perspective of Crystal Facet Engineering and Modulation of Surfaces

Generation of hydrogen is one of the most promising routes to harvest solar energy for its sustainable utilization. Among different routes, the photoelectrochemical (PEC) process to split water using solar light to produce hydrogen is the green method to generate hydrogen. The sluggish kinetics through complicated pathways makes the oxygen evolution reaction the rate limiting step of the overall water splitting process. Therefore, development of an efficient photoanode for the sustainable oxidation of water is most challenging in an efficient overall PEC water splitting process. The low solar to hydrogen conversion efficiency arises from the slow surface kinetics, poor hole diffusion, and fast charge recombination processes. There have been strategies to improve catalytic performances through the removal of such detrimental effects. The generation of engineered surfaces is one of the important strategies recently adopted for the enhancement of the catalytic efficiencies. The present review has been focused on the discussion of engineered surfaces using crystal facet engineering, protective surface layer, passivation using the atomic layer deposition (ALD) technique, and cocatalyst modified surfaces to enhance the catalytic efficiency. Some of the important parameters defining catalyst performance are also discussed at the beginning of the review.