Mechanical pretreatment of typical agricultural biomass on shape characterization and NO emissions during combustion
Yutong Feng1, Jiangang Huang2, Jinzhi Zhang3
1Key Laboratory of Biofuels, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, 189 Songling Road, Qingdao 266101, China; University of Chinese Academy of Sciences, Beijing 100049, China; Shandong Energy Institute, 189 Songling Road, Qingdao 266101, China; Qingdao New Energy Shandong Laboratory, 189 Songling Road, Qingdao 266101, China.
Abstract:
The impact of mechanical pretreatment of corn straw (CS), pea straw (PS), and wheat straw (WS), on shape characterization and NO emissions during combustion were investigated in this research. Particle size ranges were obtained and characterized their shape factors using Image J correction. The thermal properties and NO emissions of the different-sized particles were investigated by TG-MS and fixed-bed reactor. Compared with CS and PS, WS is more likely to break into smaller particles due to its moderate strength. Amine-N completely disappeared after pyrolysis, whereas pyrrolic-N and pyridinic-N were the main N functionalities in char-N. During the volatile burning stage, the maximum peak of NO concentration was 270, 354 and 311 ppm for CS, PS and WS, respectively. NO was detected at a steady level during the semicoke combustion stage, and the duration increased with particle size. The NO concentration decreased sharply in a short duration during the fixed carbon combustion stage.
Related Concept Videos
Microorganisms in Agriculture and Food industry
Production of Organic Acids
Production of Biopesticides
Bioplastics
Biological Treatment of Effluent and Waste Water


