Related Experiment Video

Updated: Jun 9, 2026

An Improved Mechanical Testing Method to Assess Bone-implant Anchorage
11:51

An Improved Mechanical Testing Method to Assess Bone-implant Anchorage

Published on: February 10, 2014

15.5K

The Effect of Patient-Related Factors on the Primary Fixation of PEEK and Titanium Tibial Components: A

Corine E Post1, Thom Bitter1, Adam Briscoe2

  • 1Orthopaedic Research Laboratory, Radboud University Medical Center, 6525 GA Nijmegen, The Netherlands.

Bioengineering (Basel, Switzerland)
|February 23, 2024
PubMed

Keywords:
cementless tibial knee componentfinite element simulationmicromotionpolyetheretherketonepopulation studytotal knee arthroplasty

More Related Videos

Proximal Cadaveric Femur Preparation for Fracture Strength Testing and Quantitative CT-based Finite Element Analysis08:04

Proximal Cadaveric Femur Preparation for Fracture Strength Testing and Quantitative CT-based Finite Element Analysis

Published on: March 11, 2017

9.3K
Imaging of the Microstructural Failure Mechanism in the Human Hip08:43

Imaging of the Microstructural Failure Mechanism in the Human Hip

Published on: September 29, 2023

834

Related Concept Videos

Factors Affecting the Risk of Infection01:26

Factors Affecting the Risk of Infection

The hosts' susceptibility to infection depends on several factors. The integrity of the skin and mucous membranes helps protect the body against microbial attacks. When the skin is altered, the chance of infection, limb loss, and even death increases.
The integrity and count of the white blood cells help the body resist pathogens and fight infection. When impaired, it reduces the body's resistance to pathogens. The acidic pH levels of the gastrointestinal, genitourinary tracts, and skin create...
Personal Protective Equipment01:20

Personal Protective Equipment

Personal protective equipment (PPE) is unique clothing or equipment worn by an employee to minimize or prevent exposure to infectious agents. PPE creates a barrier between the employee and the infectious materials. PPE must be readily available in the patient care area. PPE includes gloves, gowns and aprons, masks and respirators, goggles, face shields, shoes, and headcovers:
PPE Use in Healthcare Settings I: Donning01:22

PPE Use in Healthcare Settings I: Donning

Donning PPE must be completed before contact with the patient. This process protects from infectious agents. The sequence and action included in each donning are critical, and the steps must be systematic to avoid exposure to pathogens. The institutional policy also needs to be followed while donning PPE. The pre-donning preparations are gathering equipment, inspecting the PPE equipment for tears, holes, or damage, removing jewelry, removing any garments below the elbows, and tying the hair...
Pulmonary Embolism I: Introduction01:29

Pulmonary Embolism I: Introduction

Pulmonary embolism (PE) occurs when a thrombus, fat or air embolus, amniotic fluid, or tumor tissue blocks one or more pulmonary arteries. These blockages originate in the venous system or the right side of the heart.EtiologyPE primarily arises from deep vein thrombosis (DVT) and other hypercoagulable states, such as inherited thrombophilias. Additional etiological factors include venous stasis, commonly seen in obesity, and endothelial injury from surgery and trauma. Less common causes include...
Pulmonary Embolism II: Diagnostic Studies and Interprofessional Care01:29

Pulmonary Embolism II: Diagnostic Studies and Interprofessional Care

Diagnosing Pulmonary EmbolismDiagnosing pulmonary embolism (PE) involves clinical assessment and advanced imaging tests. The preferred diagnostic tool is the spiral (helical) CT scan or CT angiography (CTA), which uses intravenous contrast media to visualize the pulmonary vasculature and identify emboli.A ventilation-perfusion (V/Q) scan is an alternative for patients unable to receive contrast media. This scan includes both perfusion and ventilation scanning. Perfusion scanning involves...
Pulmonary Embolism I: Introduction01:19

Pulmonary Embolism I: Introduction

A blood clot, or thrombus, is a semi-solid mass composed of fibrin, platelets, and red blood cells. When it forms within a vessel, it can obstruct blood flow, known as thrombosis. If part of the clot detaches, it becomes an embolus that can travel and block distant vessels. When this occurs in the pulmonary arteries, it causes a condition known as pulmonary embolism (PE).Origin and ImpactMost often, the embolus originates from a thrombus in the deep veins of the lower limbs, a condition called...