Effective stabilization of heavy metals in solid waste and sludge pyrolysis using intercalated-exfoliated modified...

Pyrolysis is effective in reducing the volume of solid waste and sludge, and produces less pollutants than incineration and landfill, but the process still suffers from heavy metal pollution. Four types of intercalated-exfoliated modified vermiculite (UIV, DIV, TIV and 3IV) were prepared using urea, dimethylsulfoxide, tributyl phosphate and 3-aminopropyltriethoxysilane as intercalators for the control of Cd, Cr, Cu, Pb and Zn in municipal sewage sludge (MSL), paper mill sludge (PML), municipal domestic waste (MWA) and aged refuse (AFE). The larger the interlayer spacing of the vermiculite, the more favorable the retention of heavy metals. 3IV was the most effective additive, with an average retention of more than 75 % of all heavy metals at 450 ℃ for the four raw materials. Cr, Cu, Pb and Zn were all at low potential ecological risk (Pr), while Cd was moderate or considerable Pr, and the addition of 3IV reduced the Pr. Distribution of intercalators between vermiculite interlayers was haphazard, and interlayer spacing results were close to those of the experiment (except for tributyl phosphate). The reactive electrons mainly flowed from the Highest Occupied Molecular Orbital (HOMO) of vermiculite flakes to the Lower Unoccupied Molecular Orbital (LUMO) of heavy metal chlorides. In contrast, the reactive electrons mostly flowed from the HOMO of heavy metal oxides to the LUMO of vermiculite flakes. Heavy metal oxides were more readily adsorbed on vermiculite flakes than heavy metal chlorides, and the adsorption capacity of Cr and Zn was stronger than that of Cd, Pb and Cu.