Related Experiment Video
Updated: Jul 2, 2025
Characterization of Electrode Materials for Lithium Ion and Sodium Ion Batteries Using Synchrotron Radiation Techniques
Published on: November 11, 2013
Internal Vanadium Doping and External Modification Design of P2-Type Layered Mn-Based Oxides as Competitive Cathodes
Xin Li1, Xin Lai1, Qingquan Kong1,2
1School of Mechanical Engineering, Chengdu University, No. 2025, Chengluo Avenue, Chengdu, 610106, PR China.
Abstract:
P2-type layered manganese-based oxides have attracted considerable interest as economical, cathode materials with high energy density for sodium-ion batteries (SIBs). Despite their potential, these materials still face challenges related to sluggish kinetics and structural instability. In this study, a composite cathode material, Na0.67Ni0.23Mn0.67V0.1O2@Na3V2O2(PO4)2F was developed by surface-coating P2-type Na0.67Ni0.23Mn0.67V0.1O2 with a thin layer of Na3V2O2(PO4)2F to enhance both the electrochemical sodium storage and material air stability. The optimized Na0.67Ni0.23Mn0.67V0.1O2@5wt %Na3V2O2(PO4)2F exhibited a high discharge capacity of 176 mA h g-1 within the 1.5-4.1 V range at a low current density of 17 mA g-1. At an increased current density of 850 mA g-1 within the same voltage window, it still delivered a substantial initial discharge capacity of 112 mAh g-1. These findings validate the significant enhancement of ion diffusion capabilities and rate performance in the P2-type Na0.67Ni0.33Mn0.67O2 material conferred by the composite cathode.
