Preparation of magnetic DTPA-modified chitosan composite microspheres for enhanced adsorption of Pb(II) from aqueous...

In this study, magnetic DTPA-modified chitosan composite microspheres (MDCM) were prepared by reverse emulsion-double crosslinking method (carbodiimide followed by glutaraldehyde) for removal of Pb(II) from aqueous solution. The obtained magnetic adsorbents were characterized by FTIR, SEM, XRD, VSM, BET, and ¹³C NMR. The effects of the pH, contact time, initial concentration, and competitive metal cations (Na(I), Ca(II), or Mg(II)) on Pb(II) adsorption were investigated. The results revealed that MDCM exhibited high removal performance over a wide pH range and in the presence of competitive metal cations. The maximum adsorption capacity of MDCM for Pb(II) is 214.63 mg g^-1 at pH 3, which is higher than most recently reported magnetic adsorbents. Adsorption kinetics and isotherms can be described by the pseudo-second-order model and Langmuir model, respectively. In addition, MDCM is easy to regenerate and can be reused five cycles with high adsorption capacity. Finally, the adsorption mechanism was further revealed by FTIR and XPS analysis. Overall, MDCM has practical application potential in removing Pb(II) from contaminated wastewater due to its high adsorption efficiency, good reusability, and convenient magnetic separation.