Magnetism-enhanced biomaterial Mg guide wire by MAP process for development of catheter insertion

The surface topography of implant tools has indicated an interfacial contact in degradation still being discovered; however, the glossy texture of a tiny magnesium wire is important for absorbable medical devices. This paper investigated the alterations of surface quality by a magnetic abrasive polishing method using a rotational magnetic field-assisted system with input parameters of revolution, abrasive media, magnetic pole, flux density, vibration, and amplitude that could noticeably enhance asperities along a sample. Furthermore, the blood flow simulation is used to analyze flow within blood vessels while maintaining the surface roughness conditions of the guide wire. The results are compared and discussed. Magnetic field simulation is employed to investigate the magnetic field strength in the polishing zone. Scanning Electron Microscopy (SEM) provides visual aids for recognizing the differences between pre-and post-workpieces of magnesium wire. The experimental results reveal that a wire diameter of 0.50 mm predominantly achieves surface morphology from the initial roughness of 0.22 μm to 0.05 μm. The results corroborate that the distribution of blood in the circulatory system was relatively stable. Hence, this study establishes a crucial benchmark for the precision polishing of ultra-thin magnesium wires, which is vital for their use as high-precision biodegradable medical devices.