Effect of electrolytic zero-valent iron activated sodium hypochlorite on sludge dewatering performance

Using electrolytic zero-valent iron-activated sodium hypochlorite (EZVI-NaClO) to pretreat sludge, the capillary suction time (CST) was utilized to evaluate sludge dewaterability. Ammonia nitrogen (NH4-N), dissolved phosphorus, and total phosphorus in the supernatant were used to analyze sludge disintegration. This approach aimed to evaluate the effectiveness of the pretreatment process and its impact on the sludge composition. The migration and transformation of extracellular polymeric substances (EPS), including dissolved EPS (S-EPS), loosely boundEPS, and tightly bound-EPS (TB-EPS), were analyzed by detecting protein and polysaccharide concentrations and three-dimensional fluorescence excitation-emission spectroscopy (3D-EEM). The sludge particle properties, including sludge viscosity and particle size, were also analyzed. The results suggested that the optimal pH value, NaClO dosage, current, and reaction time were 2, 100 mg/gDS (dry sludge), 0.2A, and 30 min, respectively, with a CST reduction of 43%. Protein and polysaccharide contents in TB-EPS were significantly reduced in the EZVI-NaClO group. Conversely, protein and polysaccharides contents in S-EPS increased, suggesting that EZVI-NaClO treatment could disrupt the EPS. Besides, the viscosity of the treated sludge decreased from 195.4 to 54.9 mPa·S, indicating that sludge fluidity became better. ZEVI-NaClO could enhance sludge dewaterability by destructing protein and polysaccharide structure and improving sludge hydrophobicity.