Extreme Dewetting Resistance and Improved Visible Transmission of Ag Layers Using Sub-Nanometer Ti Capping Layers

As technology development drives the thickness of thin film depositions down into the nano regime, understanding and controlling the dewetting of thin films has become essential for many applications. The dewetting of ultra-thin Ag (9 nm) films with Ti (0.5 nm) adhesion and capping layers on glass substrates was investigated in this work. Various thin film stacks were created using magnetron sputtering and were analyzed using scanning electron microscopy/energy dispersive X-rays, Vis/IR spectrometry, and four four-point probe resistivity measurements. Upon annealing for 5 h in air at 250 °C, the addition of a 0.5 nm thick Ti capping layer reduced the dewet area by an order of magnitude. This is reflected in film resistivity, which remained 2 orders of magnitude lower than uncapped variants. This Ti/Ag/Ti structure was then deployed in a typical low-emissivity window coating structure with additional antireflective layers of AZO, resulting in a superior performance upon annealing. These results demonstrate an easy, manufacturable process that improves the longevity of devices and products containing thin Ag films.