Related Experiment Video
Updated: Jul 29, 2026

Operation of a 25 KWth Calcium Looping Pilot-plant with High Oxygen Concentrations in the Calciner
Published on: October 25, 2017
Improving Fine Particle Removal Using a Single-Channel Slit Bubbling Device in Wet Flue Gas Desulfurization System
Can Fang1, Yi Xiao1, Wencong Qiu1
1State Key Laboratory of Coal Combustion (SKLCC), School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan, Hubei 430074, China.
Abstract:
To improve the cleanliness of coal-fired power plants' particulate matter emissions, a novel device (single-channel slit bubbling particle removal device (SCSB-PRD)) is proposed to improve the wet flue gas desulfurization system's (WFGDs) collaborative particle removal effect. Actual coal-fired flue gas was used to test the particle removal performance. The results showed that the flue gas temperature had no obvious effect on the scrubbing effect of the SCSB-PRD. The scrubbing space, scrubbing liquid volume, and flue gas flow rate effectively changed the gas-liquid flow state, and the bubbling state was the key factor in particle removal. The jet-bubbling contact state was more conducive to removing particles than the foam bubbling state. The jet-bubbling state improved the removal efficiency of fine particles by approximately 30% compared to the foam bubbling state. The device operated in a single stage, and the removal performance of the particulate matter reached more than 60%. Even the submicron particles had a satisfactory removal performance of greater than 50%. The particulate matter concentration at the outlet of the WFGDs was reduced to less than 10 mg/m3, which provides a feasible transformation path for ultraultra-low emissions of particulate matter from coal-fired power plants.

