Preparation of KHA/SA/MMT composites and their adsorption properties for Rhodamine B

Two natural adsorbent materials, potassium humate (KHA) and montmorillonite (MMT), were successfully prepared by embedding them in sodium alginate (SA) gel spheres through physical cross-linking with CaCl₂. And CaCO₃ was used as a porogenic agent to prepare the porous composites, KHA/SA/MMT. The materials were characterized by using XRD, TGA, SEM, and N₂ adsorption/desorption equipment. The results showed that MMT and KHA were successfully embedded in the SA gel; the introduction of MMT increased the thermal stability of the composites and the embedding of MMT, and the porogenic effect of CaCO₃ increased the specific surface area of the composites substantially, which provided favorable conditions for adsorption and treatment of pollutants. In addition, a one-way exploratory experiment yielded a higher removal rate of Rhodamine B (RhB) at D = 0.6 g/L, pH = 5, C₀ = 100 mg/L, and t = 360 min. The adsorption kinetics and adsorption isotherm conformed to the secondary kinetic model and Langmuir model, respectively, and the maximum adsorption of RhB by KHA/SA/MMT could reach up to 884.96 mg/g at 303 K. The adsorption mechanism for RhB was shown by FT-IR and XPS analyses to be possibly bound by non-covalent bonding forces. After seven consecutive adsorption-desorption cycles, the adsorption of RhB by KHA/SA/MMT still reached 80.75%. Therefore, the prepared gel spheres have the advantages of easy regeneration and efficient reuse and great potential for application in purifying RhB from wastewater.