Cradle-to-gate life cycle assessment of Spirulina bioplastic produced via plasticization with glycerol

Bioplastics have been used as alternatives to conventional petroleum-based plastics to lessen the burdens on marine and terrestrial environments due to their non-biodegradability and toxicity. However, recent studies have shown that not all bioplastics may be environmentally friendly. Microalgae, such as Spirulina that do not require arable land, have been identified as a potential bioplastic source. In this study, cradle-to-gate life cycle assessment (LCA) was carried out in openLCA program using the Agribalyse database, to evaluate the environmental impacts of Spirulina bioplastic, formed from plasticization of Spirulina powder with glycerol. Two processes were created for the inventories of (i) Spirulina powder and (ii) Spirulina bioplastic, where the output of the former served as an input for the latter. The extruded bioplastic sheets were food-grade and could be used as edible packaging materials. The bioplastic was also compared to conventional plastics and it was found that the energy consumption was 3.83 ± 0.26 MJ/kg-bioplastic, which was 12% and 22% higher than that of LDPE and PVC plastic films, respectively. The impacts on the environment showed that the chemical growth medium (Zarrouk medium) and electricity were the main contributors in most of the categories. Compared to the PVC and LDPE films, the Spirulina bioplastic's impacts on the aquatic ecosystems were 2-3 times higher. The global warming potential of the Spirulina bioplastic was 1.99 ± 0.014 kg CO₂ eq, which was 23% and 47% lower than that of LDPE and PVC films, respectively. Sensitivity analysis was carried out by changing the electricity source and using alternative growth media. Except for the case of switching to solar energy, the results for other cases did not differ significantly from the base case scenario. Future studies were suggested to identify different greener alternatives to the growth medium as well as different energy mixes for more environmentally benign solutions.