Design and tribological performance of graphene nanofluids dispersed by dragging effect of bicomponent gelator

Nanofluids have excellent lubrication and high thermal conductivity. However, the agglomeration and sedimentation produced by the large surface energy of nanoparticles in base liquid threaten the long-term dispersion stability and impact the wide application of nanofluid. In this work, based on the self-assemble behavior and continuous network structure formed by low molecular weight organic gelator, the uniform clusters were formed through regulating the kinetics behavior in the gelling process. The dragging effect was demonstrated by oleic acid - sodium dodecyl sulfate (OA-SDS) bicomponent gelator and graphene oxide (GO) nanosheets. The results showed that GO nanofluids dispersed by OA-SDS were stable for more than 12 months. The well-dispersed GO nanofluid exhibited better anti-friction and anti-wear properties under both immersion and electrostatic minimum quantity lubrication conditions. Moreover, the lower contact angle, surface tension and droplet size of nanofluids after charging improved the wettability on the frictional interface. The GO adsorption film formed on the friction interface protected the tribochemical reaction film of iron oxide and prevented the occurrence of sintering of base oil.