Related Experiment Video
Updated: Jul 1, 2025

Experimental System of Solar Adsorption Refrigeration with Concentrated Collector
Published on: October 18, 2017
Assessing energy saving potential of wavelength-dependent passive daytime radiative cooler implemented with
Yujie Yang1, Guoqiang Zhang1, Li Rong1
1Department of Civil and Architectural Engineering, Aarhus University, Inge Lehmanns Gade 10, Aarhus C, 8000, Denmark.
Abstract:
The Passive Daytime Radiative Cooler (PDRC) exhibits potential in enhancing building energy conservation due to its high emissivity in wavelength between 8 μm and 13 μm. However, current building energy simulation programs, e.g., EnergyPlus, generally adopt a constant emissivity. To implement the wavelength-dependent PDRC model into EnergyPlus, a roof model was introduced to couple it with EnergyPlus to assess the energy saving potential of PDRC more reasonably. To assess the PDRC roofs, the impact of buildings constructed in different eras, building heights, and climatic conditions in China on building energy saving was investigated. The results showed that more energy was saved in regions with high cooling demands e.g., Shanghai and Guangzhou. Applying PDRC on roofs of buildings constructed pre 2001 in severe cold regions increased building energy consumptions. Furthermore, buildings with well insulated roofs coated by PDRC were not equally beneficial for reducing cooling demands in summer compared to buildings with non-insulated roofs, but heating demands in winter could be reduced. With an increase in building height, the energy saving potential of PDRC roofs was reduced. Therefore, a comprehensive analysis was imperative considering the local climates as well as the building itself when PDRC is to be applied.
More Related Videos
04:35Author Spotlight: Simulation and Analysis of the Temperature Rise of Ring Main Unit Equipment
Published on: July 5, 2024
09:00Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass ADG Fresnel Lens for Concentrating Photovoltaics
Published on: October 27, 2017
Related Concept Videos
Conduction, Convection and Radiation: Problem Solving
In order to solve a problem related to heat transfer, first of all, the situation needs to be examined to determine the type of heat transfer involved. This could...
Heating and Cooling Curves
For instance, the addition of heat raises the temperature of a solid; the amount of heat absorbed depends on the heat capacity of the solid (q = mcsolidΔT). According to thermochemistry, the relation between the amount of heat absorbed or released by a substance, q, and its...
Energy Conservation and Bernoulli's Equation
All the terms in the equation have the dimension of energy per unit volume. The kinetic energy per unit volume is called the kinetic energy density, and the potential energy per unit volume is...
Radiation: Applications
The average...
Mechanism of heat transfer
Mechanisms of Heat Transfer II