Related Experiment Video
Updated: Jul 1, 2025

Preparation of Binary and Ternary Deep Eutectic Systems
Published on: October 31, 2019
Study of ternary deep eutectic solvents to enhance the bending properties of ash wood
Ruocai Bai1,2, Wenhao Wang1,2, Mengyao Chen1,2
1College of Furnishings and Industrial Design, Nanjing Forestry University Nanjing 210037 China wuyan@njfu.edu.cn.
Abstract:
Deep eutectic solvents (DESs) are considered one of the most promising biomass pretreatment reagents, and their research applications in woody fibrous biomass are increasing yearly. Inspired by the research related to wood bending, we explored the effects of different DES systems on the bending development of wood, and the results showed that the addition of anhydrous ferric trichloride to the DES system of lactic acid/choline chloride could enhance the treatment effect that increased the bendability and torsion resistance of ash wood. The anhydrous FeCl3 could act as an active site and provide acidic protons to improve the treatment efficiency of DES. In addition, the addition of an appropriate amount of water can reduce the viscosity of the DES system, and the highest lignin removal rate was obtained at 10 wt% of water in the DES, which resulted in the best mechanical properties and tensile resilience of ash wood, with the tensile strength and stability of 97 MPa and 13.6%, respectively, as determined by experiments with different water contents in different mass fractions. Therefore, using a DES can effectively improve the bending properties of wood.
Related Concept Videos
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Wood Products
Glue-laminated wood, often referred to as glulam, combines multiple smaller pieces of dimensional lumber using adhesives to form a single, larger piece. Cross-laminated timber consists...
Seasoning of Wood
Achieving equilibrium moisture content is the goal of seasoning; this is the point where the wood's moisture content stabilizes to align with the moisture levels of the surrounding environment. Proper...
Bending
In pure bending, the bending stress in a beam is calculated based on the bending moment and...
Bending of Members Made of Several Materials
Hooke's Law determines stress in each material, stating that stress is proportional to strain but varies due to each...
Softwoods and Hardwoods

