Polymer Lewis Base for Improving the Charge Transfer in Tin-Lead Mixed Perovskite Solar Cells

The poor film stability of Sn-Pb mixed perovskite film and the mismatched interface energy levels pose significant challenges in enhancing the efficiency of tin-lead (Sn-Pb) mixed perovskite solar cells. In this study, polyvinylpyrrolidone (PVP) is introduced into the PVK perovskite precursor solution, effectively enhancing the overall stability of the film. This improvement is achieved through the formation of robust coordination bonds between the carbonyl (C=O) in the pyrrole ring and the undercoordinated Sn^II and Pb^II, thereby facilitating the passivation of defects. Furthermore, the introduction of PVP inhibits the oxidation of tin (Sn), thereby enhancing the n-type characteristics of the perovskite film. This adjustment in the energy level of the PVK perovskite film proves instrumental in reducing interface energy loss, subsequently improving interface charge transfer and mitigating device recombination. Consequently, perovskite solar cells incorporating PVP achieve an outstanding champion power conversion efficiency (PCE) of 21.31%.