Related Experiment Video
Updated: Jul 19, 2026

Quantum State Engineering of Light with Continuous-wave Optical Parametric Oscillators
Published on: May 30, 2014
Multiwavelength erbium-doped fiber laser using the polarization-hole-burning effect for multichannel acoustic
Abstract:
We propose and demonstrate a novel, to the best of our knowledge, fiber-optic multipoint acoustic detection system based on a multiwavelength erbium-doped fiber (EDF) laser (MWEDFL) using the polarization-hole-burning effect with Fabry-Perot interferometers as the acoustic cavity-loss modulator. A polarization-wavelength-related filter is designed to assign a distinct polarization state to each laser wavelength. By adjusting the polarization state, the polarization-dependent loss and gain of each laser line are tuned to be equal, effectively suppressing the mode competition of EDF and enabling a stable MWEDFL. Each laser line serves as a separate channel for acoustic detection. Theoretical and experimental analyses are conducted to study the transient-response-amplification effect on the acoustic perturbation of the MWEDFL. The results show that the proposed MWEDFL exhibits an amplification effect on the sound-induced cavity-loss modulation, effectively enhancing the sensitivity by 13 dB compared to that obtained using an external-light-source demodulation method. In addition, the MWEDFL based on the PHB effect avoids cross talk between laser channels and can achieve high sensitivity and simultaneous multichannel acoustic detection.
More Related Videos
14:18Automation of Mode Locking in a Nonlinear Polarization Rotation Fiber Laser through Output Polarization Measurements
Published on: February 28, 2016
08:48Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy
Published on: November 22, 2019
Related Concept Videos
UV–Vis Spectrometers
Gas Chromatography: Types of Detectors-II
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used.