Acoustic monitoring of compaction in cohesive granular materials

We study the transition from cohesive to noncohesive states of cemented granular materials (synthetic rocks) under oedometric loading, combining simultaneous measurements of ultrasound velocity and acoustic emission (AE: microseosmicity). Our samples are agglomerates made of glass beads bonded with a few percent of cement, either ductile or brittle. These cemented granular samples exhibit an inelastic compaction beyond certain axial stresses likely due to the formation of compaction bands, which is accompanied by a significant decrease of compressional wave velocity. Upon subsequent cyclic unloading-reloading with constant consolidation stress, we found the mechanical and acoustic responses like those in noncohesive granular materials, which can be interpreted within the effective medium theory based on the Digby's bonding model. Moreover, this model allows P-wave velocity measured at vanishing pressure to be interpreted as an indicator of the debonding on the scale of grain contact. During the inelastic compaction, stick-slip-like stress drops were observed in brittle cement-bonded granular samples accompanied by the instantaneous decrease of the P-wave velocity and AEs which display an Omori-like law for foreshocks, i.e., precursors. By contrast, mechanical responses of ductile cement-bonded granular samples are smooth (without visible stick-slip-like stress drops) and mostly aseismic. By applying a cyclic loading-unloading with increasing consolidation stress, we observed a Kaiser-like memory effect in the brittle cement-bonded sample in the weakly damaged state which tends to disappear when the bonds are mostly broken in the noncohesive granular state after large-amplitude loading. In this paper, we show that the macroscopic ductile and brittle behavior of cemented granular media is controlled by the local processes on the scale of the bonds between grains.