Related Experiment Video
Updated: Jun 30, 2025

Measurements of Waves in a Wind-wave Tank Under Steady and Time-varying Wind Forcing
Published on: February 13, 2018
Wind-driven hydrodynamic characteristics of Lake Taihu, a large shallow lake in China
Zongpu Xue1, Wei Zhu2, Lin Cheng3
1Jiangsu Nanjing Environmental Monitoring Center, Nanjing, 210098, China.
Abstract:
As an essential drinking water source and one of the largest eutrophic shallow lakes in China, the management of Lake Taihu requires an adequate understanding of its hydrodynamic characteristics. Studying the hydrodynamic characteristics of Lake Taihu based on field observations is limited owing to its large area and the lack of flow field stability. Previous studies using hydrodynamic models experienced challenges, such as dimensionality and lack of dynamic response analysis between flow field and realistic wind; therefore, the results were still inconclusive. In this study, a 3D model of Lake Taihu, calibrated and validated based on field observations, was used to simulate and compare three scenarios: windless, steady wind, and realistic wind. The hydrodynamic characteristics of Lake Taihu were analyzed as close to the actual conditions as possible. The results showed that wind-driven currents dominated the flow field in Lake Taihu, and the horizontal velocity driven by wind was more than 6 times that without wind. Observing a stable flow field in Lake Taihu was difficult because of the variability of realistic wind. The hydrodynamic characteristics of Lake Taihu were defined as "strongly affected by wind," "higher on the surface and smaller at the bottom," and "difference between the surface and the bottom." Vertical turbulent kinetic energy can be used to characterize the variable flow field of a wind-driven lake and has a positive correlation with wind speed. Therefore, it could be used as a key component to predict water blooms with practical implications.
More Related Videos
Related Concept Videos
Hydrostatic Pressure Force on a Curved Surface
Laminar Flow
Hydrostatic Pressure Force on a Plane Surface
Design Example: Creating a Hydraulic Model of a Dam Spillway
Typical Model Studies
Hydraulic Jump: Problem Solving

