CFD study of self-cleaning system of multi-stage tangential roller threshing unit for precise buckwheat breeding

Buckwheat is a globally recognized, nutritionally rich crop with robust adaptability, serving as a multi-purpose plant for its health benefits. Achieving precise and mechanized plot seed harvesting is a critical step in obtaining accurate results in breeding experiments. However, plot breeding requires no seed retention, no mixing, and ensures no accumulation of seed in the threshing unit. A self-cleaning technology was developed to prevent seed retention, mixing, and accumulation in the multistage tangential cylinder threshing unit. The newly designed cleaning system has five air inlets and a centrifugal fan for pneumatic cleaning. CFD simulations were conducted for each inlet position, coupled with four varying inlet velocities and the rotation speed of the main threshing cylinder. During the post-processing stage of the CFD modeling, a line consisting of fifty points was drawn beneath the threshing drums, and the air velocity at these points was recorded. The optimal configuration of inlet position, inlet air velocity, and main threshing drum rotation speed for efficient cleaning was identified based on the ratio of points beneath the drums where the airflow speed surpassed the suspension speed of buckwheat to the points where the airflow speed was lower than the suspension speed of buckwheat. The optimal configuration for "inlet_1" was identified based on the suspension velocity of buckwheat grain, with an inlet velocity of 4 m/s and a main threshing drum speed of 450 rpm.