Related Experiment Video
Updated: Jun 20, 2026
Elaborate Control of Inkjet Printer for Fabrication of Chip-based Supercapacitors
Published on: November 30, 2021
Environmentally Friendly Water-Based Reduced Graphene Oxide/Cellulose Nanofiber Ink for Supercapacitor Electrode
Kiran I Nargatti1, Sandeep S Ahankari1, John Ryan C Dizon2
1School of Mechanical Engineering, Vellore Institute of Technology, Vellore, Tamil Nadu 632014, India.
Abstract:
The agglomeration of reduced graphene oxide (rGO) in water makes the development of rGO inks for supercapacitor printing challenging. Cellulose nanofiber (CNF), a biodegradable and renewable nanomaterial, can act as a nanospacer, preventing the agglomeration and restacking of rGO flakes. In this work, rGO/CNF films were fabricated using an environmentally friendly water-based rGO/CNF ink. In the absence of an additional binder/surfactant, the rGO/CNF films demonstrated remarkably enhanced hydrophilicity while retaining good electrical conductivity. The concentration of CNF was varied to observe the variation in the electrochemical performance. At a current density of 1 mA/cm2, the rGO/CNF-15 film exhibited a maximum areal capacitance of 98.61 mF/cm2, closely matching that of pure rGO films. Because of its excellent electrical performance, ease of manufacturing, and environmental friendliness, this water-based rGO/CNF ink may have promising applications in the printing of supercapacitor electrodes.
More Related Videos
12:00Evaluating the Electrochemical Properties of Supercapacitors using the Three-Electrode System
Published on: January 7, 2022
08:59Synthesizing a Gel Polymer Electrolyte for Supercapacitors, Assembling a Supercapacitor Using a Coin Cell, and Measuring Gel Electrolyte Performance
Published on: November 30, 2022
