Related Experiment Video
Updated: Jun 30, 2025

An Inverse Analysis Approach to the Characterization of Chemical Transport in Paints
Published on: August 29, 2014
24Model-based comparative analysis of two catastrophic hazardous chemical pipeline accidents
Jianhao Wang1,2, Mengmeng Zhang1,2, Huacai Xian1,2
1School of Transportation and Logistics Engineering, Shandong Jiaotong University, People's Republic of China.
Abstract:
Objectives. This study conducted a comparative analysis of two catastrophic pipeline accidents in China in order to identify some common mistakes and lessons learned to prevent similar accidents. Methods. The 24Model was used in this study, which provides a universal pathway for accident analysis from the individual level to the organizational level. Results. There were similarities between the two cases in the aspects of the occurrence, development, emergency and causation at different levels: both were caused by leaks of pipelines and evolved into multiple explosions during emergency response; both leaks were caused by the corrosion of pipelines in the confined space of a damp or salt-spray environment; both were classified as 'responsibility accidents', and unsafe acts, such as the failure to identify hidden hazards of pipelines that were the direct cause of accidents, reflected the shortcomings of individual safety habitual behaviour in terms of knowledge, awareness, habits and psychology; weaknesses in the organizational management mainly concerned hazard identification, pipeline maintenance, emergency disposal, etc.; and there is not a good safety climate within the organization. Conclusions. Organizations should develop a closed-loop management system and strengthen the construction of safety culture, and the government should supervise the implementation of procedures.
More Related Videos
00:05In Silico Modeling Method for Computational Aquatic Toxicology of Endocrine Disruptors: A Software-Based Approach Using QSAR Toolbox
Published on: August 28, 2019
11:38High Content Screening Analysis to Evaluate the Toxicological Effects of Harmful and Potentially Harmful Constituents HPHC
Published on: May 10, 2016
Related Concept Videos
Hazard Ratio
For example, in a clinical trial...
Design Example: Creating a Hydraulic Model of a Dam Spillway
Multiple Pipe Systems
Series Configuration
In a series configuration, fluid flows sequentially from one pipe...
Typical Model Studies
Major Losses in Pipes
Fluid flow can be classified as laminar or turbulent, primarily based on the Reynolds number. This dimensionless number reflects the relative influence of inertial to...
Design Example: Analyzing Capacity Contours for Flood Risk Assessment