Unlocking Syngas Synthesis from the Catalytic Gasification of Lignocellulose Pinewood: Catalytic and Pressure...

Modern technologies transform biomass into commodity chemicals, biofuels, and solid charcoal, making it appear as a renewable resource rather than organic waste. The effectiveness of Mo, Fe, Co, and Ni metal catalysts was investigated during the gasification of lignocellulosic pinewood. The primary goal was to compare the performance of iron and nickel catalysts in the low- and high-pressure production of syngas from pinewood. This is the first study that has reported high-pressure gasification of pinewood without the use of an external gasifying agent, producing syngas containing hydrogen, carbon monoxide, and carbon dioxide along with considerable amounts of methane with or without a catalyst. Also, the same gasification at low pressures was compared. In this study, the iron catalyst produces syngas more efficiently at higher pressure and 800 °C, and contains 43 mol % H₂, 22 mol % CO₂, 26 mol % CH₄, and 8 mol % CO in comparison to the nickel catalyst. High pressure produces a large amount of methane too. The nickel catalyst produces higher syngas at low pressure and 850 °C, and contains 55 mol % H₂, 9 mol % CO₂, 5 mol % CH₄, and 30 mol % CO. Low-pressure gasification produces less amounts of CH₄ and CO₂. Also, the H₂/CO ratio is ∼1.81 using the nickel catalyst at low pressures, which is good for utilizing syngas as a feedstock. These results highlight the importance of catalyst selection, reactor configuration, and operating circumstances in adjusting gasification product composition. The study's findings provide information about optimizing syngas production from pinewood, which is critical for the development of sustainable and efficient energy conversion technologies.