Related Experiment Video
Updated: Jun 30, 2025

Author Spotlight: Advancing Agricultural Land Ecosystem Research with a Hydraulic Property Analyzer to Assess Soil Health
Published on: August 9, 2024
A framework for estimating soil water characteristic curve and hydraulic conductivity function of permeable reactive
Christopher S Gray1, Jongmuk Won2, Susan E Burns3
1Geosyntec Consultants, Atlanta, GA, 30319, United States.
Abstract:
The unsaturated behavior of permeable reactive barriers (PRB) is a critical component in predicting the removal efficiency through the adsorption of contaminants. This study investigates the framework to estimate the soil water characteristic curve (SWCC) and hydraulic conductivity function (HCF) for iron oxide-coated sand (IOCS) and zeolite, which are common materials used in PRBs. A multistep outflow (MSO) experiment was performed and the results of the MSO experiment were used to optimize associated parameters in Kosugi's SWCC and HCF. In addition, three scenarios of optimization analysis were investigated to evaluate the best-fitting model for estimating SWCC and HCF. The low root mean square error (RMSE) of fitted parameters indicates the Kosugi model well described the observed suction profiles in MSO experiments. In addition, the lowest RMSE and coefficient of variation suggested the inclusion of the additional parameter β provided the best estimation of the three materials (clean sand, IOCS, and zeolite). The physically reasonable estimation of SWCC and HCF of the three materials from the optimized parameters suggests the proposed framework is a reasonable model for the unsaturated behavior of PRBs.
More Related Videos
08:09Wastewater Irrigation Impacts on Soil Hydraulic Conductivity: Coupled Field Sampling and Laboratory Determination of Saturated Hydraulic Conductivity
Published on: August 19, 2018
10:30Soil Lysimeter Excavation for Coupled Hydrological, Geochemical, and Microbiological Investigations
Published on: September 11, 2016
Related Concept Videos
Permeability of Concrete
Design Example: Design of an Irrigation Channel
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
Pore Size Distribution
Adequate...
Uniform Depth Channel Flow
Water Cement Ratio