Electrophysiological Recording from a "Model" Cell

The muscle cell or neuron membrane is functionally equivalent to a resistor-capacitor (RC) circuit with the membrane resistance and capacitor in parallel. Once inserted inside the membrane, an electrode introduces a serial resistance and small capacitance to the RC circuit. Through a narrow opening at its tip (∼0.1-μm), current can pass through the electrode, into the cell, and back to the outside (ground) across the membrane to complete the circuit. This arrangement enables a voltage difference between the outside and inside of the cell membrane to be recorded. To determine cell membrane properties, a current can be injected into the cell through the electrode. One complication with this approach, however, is that the voltage difference measured with the electrode includes the voltage drop across the cell membrane and that across the electrode. Furthermore, a small amount of current is drawn by the electrode capacitor, thereby slowing the current flow across the membrane. Fortunately, most amplifiers are equipped with bridge balance and capacitance compensation functions so that the effects of the electrode on cell membrane properties can be canceled out or minimized. This protocol describes the basics of setting up and conducting electrophysiological experiments using a model cell. For the novice, a model cell provides a way to learn the operation of electrophysiology equipment and software without the anxiety of damaging living cells. This protocol also illustrates passive membrane properties such as the input resistance, capacitance, and time constant.