Inhibition Effect of Coal Spontaneous Combustion by Composite Inhibitory Foam Based on CaCl₂-Melatonin Inhibitor

Inhibitory foam technology plays an important role in inhibiting coal spontaneous combustion. To enhance the stability and inhibitory performance of inhibitory foam for coal spontaneous combustion, a novel physicochemical composite inhibitor was developed in this work. CaCl₂ was chosen as an inorganic salt physical inhibitor to compound with the chemical inhibitor melatonin (MLT) due to its corresponding good foam stability. When the mass ratio of CaCl₂ to MLT was 4:1, the lowest CO release concentration of 7337.06 ppm at 200 °C was observed in the composite inhibitor-treated coal. Furthermore, the addition of 20 wt % of the composite inhibitor resulted in a foam half-life of 3067 min, which was 5.89 times longer than that of the water-based foam. In comparison with the water-based foam, the inhibitory foam based on 20 wt % CaCl₂-MLT composite inhibitor exhibited more excellent foam stability, wetting ability, and inhibition performance. The release of CO at 200 °C was 7854.6 ppm, showing a reduction of 63.2% compared to the raw coal. Moreover, the composite inhibitory foam could significantly delay the onset of the characteristic temperature and reduce the weight change during the decomposition stage by 12.8%.