Nanomechanical behavior of coal with heterogeneous minerals and pores using nanoindentation

The coal's mechanical properties have a significant influence on mining safety and the mine environment. Preparing a standard sample and conducting repeat mechanical testing are challenging because the coal is primarily soft, fragmented, and rich in developed fractures. This study used nanoindentation technology, combined with X-ray diffraction, small-angle X-ray, a high magnification microscope, and mechanical parameter scale-up analysis, to study the micromechanical of three coals being dominated by heterogeneous components and pores. The results show that load-displacement curves with different maximum loads (50 mN, 100 mN, and 200 mN) all appear the pop-in events, and coal heterogeneity affects the frequency of their occurrence. As the maximum load is increased, pop-in event of DSC appears once each, YW increases from zero to three times and HM decreases from four to two times. The heterogeneity of pore structure has little effect on residual displacement, which is mainly affected by hard minerals, and hard minerals reduce the law that residual displacement increases with the increase in maximum load. The micromechanical parameters of soft coals are mainly affected by large pores, while hard coals are mainly affected by hard minerals. The coal's heterogeneity does not affect the linear relationship between hardness and elastic modulus, but stronger heterogeneity will weaken the linear relationship between fracture toughness and elastic modulus. Compared to the mechanical parameters after scale-up, the values obtained based on nanoindentation are less than 15.588% larger, and the increase in the heterogeneity and hard minerals can make the predicted parameters more accurate. The nanoindentation technique can not only provide an efficient and accurate method for studying the mechanical properties of heterogeneous coal at the nanoscale, an important guide for large-scale coal.