Miniaturized equal/unequal Wilkinson power dividers capable of harmonic suppression utilizing microstrip π-shaped...

In this paper, modified π-shaped resonator composed of both microstrip transmission lines and lumped elements are employed to design a Wilkinson power divider. Utilizing these resonators leads to designing a compact divider featuring a selectable operating frequency with optional power division ratio and very wide-range harmonic suppression. To vary the operating frequency and the power division ratio, the values of just the utilized lumped elements are changed without manipulating the dimensions of microstrip lines. As a design sample, a miniaturized divider capable of operating at four frequencies i.e., 0.5, 1.0, 1.5 and 2 GHz with optional equal or unequal power division and harmonic suppression ability at each of these frequencies is designed and simulated. Finally, as a feasible sample, another Wilkinson power divider which can optionally operate at 700 MHz with equal power division or 1.2 GHz with unequal power division is designed and implemented. Based on the measurement results, the spurious harmonics from 2nd to 25th in the 700 MHz-divider and 2nd to 15th in the 1.2 GHz-divider are suppressed. Moreover, almost 96% and 93% size reduction at 700 MHz and 1.2 GHz, respectively, are achieved. The S21 and S31of the unequal divider are - 8.8 and - 3.73 dB, which indicate an unequal 3.2:1 power division.