Improved Thermal and Electrical Properties of P-I-N-Structured Perovskite Solar Cells Using ZnO-Added PCBM as...

Not only can perovskite solar cells be exposed to high temperatures, up to 80 °C, depending on the operating environment, but absorbed energy is lost as heat, so it is important to have thermal stability for commercialization. However, in the case of the recently reported p-i-n structure solar cell, most of the electron and hole transport layers are composed of organic materials vulnerable to heat transfer, so the light absorption layer may be continuously exposed to high temperatures when the solar cell is operated. In this study, we attempted to improve the thermal conductivity of the electron transport layer using phenyl-C61-butyric acid methyl ester (PCBM) containing zinc oxide (ZnO). As a result, the thermal conductivity was improved by more than 7.4% and 23.5% by adding 6.57vol% and 22.38vol% of ZnO to PCBM, respectively. In addition, the insertion of ZnO resulted in changes in the electron transport behavior and energy level of the electron transport layer. As a result, it was confirmed that not only could the temperature stability of the perovskite thin film be improved, but the efficiency of the solar cell could also be improved from 14.12% to 17.97%.