Related Experiment Video
Updated: Jun 29, 2025

Interactive and Visualized Online Experimentation System for Engineering Education and Research
Published on: November 24, 2021
Integrated Circuit of a Chua's System Based on the Integral-Differential Nonlinear Resistance with Multi-Path
Zhikui Duan1, Huosheng Li1, Shaobo He2
1School of Electronic Information Engineering, Foshan University, Foshan 528225, China.
Abstract:
In this paper, we present a fully integrated circuit without inductance implementing Chua's chaotic system. The circuit described in this study utilizes the SMIC 180 nm CMOS process and incorporates a multi-path voltage-controlled oscillator (VCO). The integral-differential nonlinear resistance is utilized as a variable impedance component in the circuit, constructed using discrete devices from a microelectronics standpoint. Meanwhile, the utilization of a multi-path voltage-controlled oscillator ensures the provision of an adequate oscillation frequency and a stable waveform for the chaotic circuit. The analysis focuses on the intricate and dynamic behaviors exhibited by the chaotic microelectronic circuit. The experimental findings indicate that the oscillation frequency of the VCO can be adjusted within a range of 198 MHz to 320 MHz by manipulating the applied voltage from 0 V to 1.8 V. The circuit operates within a 1.8 V environment, and exhibits power consumption, gain-bandwidth product (GBW), area, and Lyapunov exponent values of 1.0782 mW, 4.43 GHz, 0.0165 mm2, and 0.6435∼1.0012, respectively. The aforementioned circuit design demonstrates the ability to generate chaotic behavior while also possessing the benefits of low power consumption, high frequency, and a compact size.
Related Concept Videos
First-Order Circuits
One common example of a first-order circuit is the RC (resistor-capacitor) circuit. These circuits are used in relaxation oscillators such as neon lamp oscillator circuits. When voltage is...
Design Example: Capacitance Multiplier Circuit
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
RLC Circuit as a Damped Oscillator
Consider a series RLC circuit. Here, the presence of resistance in the circuit leads to energy loss due to joule heating in the resistance. Therefore, the total electromagnetic energy in the circuit is no longer constant and decreases with time. Since the magnitude of charge, current, and potential difference continuously decreases, their oscillations are said to be damped. This is...
Second-order Op Amp Circuits
The analysis of such circuits follows a systematic approach, similar to the second-order RLC circuits. In practical scenarios, bulky inductors are rarely employed due to their size and weight. This means...
Applications of RC Circuits
Oscillations In An LC Circuit

