Evaluation of the Ejection Pressure for Tracking Internal Cracks during Compaction in Bilayer Tablet Formulations...

This study aimed to evaluate the ejection pressure and the correlation of the findings with the occurrence of internal cracks within bilayer tablets (BLTs) consisting of metformin HCl (MF) and evogliptin tartrate (EG). Then, the mechanism of tablet failure was provided by the finite element method (FEM). The ejection pressure and the difference in diameter depending on MAIN-P were evaluated to understand the correlation between ejection pressure and change in the BLT internal structure. The ejection pressure and the difference in diameter increased as the MAIN-P increased, then steeply decreased from 350 MPa to 375 MPa of MAIN-P, despite there being no pattern in compaction breaking force and porosity. The mechanical integrity at the BLT interface was weakened by internal cracks, reducing ejection pressure. The stress distribution analysis during the compression revealed that crack formation caused by entrapped air located at the center of the BLT interface may not propagate due to concentrated stress, which promotes a tight bond at the edge of the BLT. Furthermore, complete delamination can occur in the ejection process due to localized and intensive shear stresses at the BLT interface. These findings indicate that the mechanisms of internal cracking and delamination were successfully confirmed by FEM simulation. Moreover, measuring ejection pressure before BLT manufacturing can prevent invisible tablet cracks without damaging the tablets.