Hydroxyapatite-lignin hybrid systems as improved poly(vinyl chloride) fillers: From preparation to application

In this study, new, functional hydroxyapatite-lignin hybrid systems were designed and characterized. The efficacy of the mechanical method utilized to obtain these systems was confirmed by Fourier transform infrared spectroscopy. The hybrid materials were also noted for their good electrokinetic stability and thermal stability. The introduction of 2.5 to 10 wt% hydroxyapatite-lignin systems into an unplasticized PVC blend using a two-step kneading and pressing method resulted in composites with relatively homogeneous distribution, as confirmed by SEM observations. The processing properties of the filler-containing blends were investigated using plastographometric analysis and MFR tests. The introduction of a lignin-predominant hybrid system into the PVC matrix results in a significant improvement of thermal stability, softening temperature, and tensile strength, while maintaining sufficient impact strength for numerous applications. Hybrid materials containing higher amounts of added lignin are promising materials with bacteriostatic properties. This can be utilized to stabilize and prevent the deposition of microorganisms, as well as the formation of biofilms, on material surfaces, thereby limiting the spread of pathogens. New eco-composites based on PVC and a hybrid filler containing lignin show promise in producing components with surfaces resistant to bacterial colonization. Hence, these materials could be used in medical and hospital equipment.