10 W super-wideband ultra-low-intensity-noise single-frequency fiber laser at 1 µm

A 10 W super-wideband ultra-low-intensity-noise single-frequency fiber laser (SFFL) at 1 µm is experimentally demonstrated, based on dual gain saturation effects from semiconductors and optical fibers, together with an analog-digital hybrid optoelectronic feedback loop. Three intensity-noise-inhibited units synergistically work, which actualizes a connection of effective bandwidth and enhancement of noise-suppressing amplitude. With the cascade action of the semiconductor optical amplifier and optical fiber amplifier, the laser power is remarkably boosted. Eventually, an SFFL with an output power of 10.8 W and a relative intensity noise (RIN) below -150 dB/Hz at the frequency range over 1 Hz is realized. More meaningfully, within the total frequency range of 10 Hz to 10 GHz exceeding 29 octaves, the RIN is controlled to below -160 dB/Hz, approaching the shot-noise limit (SNL) level. To the best of our knowledge, this is the lowest RIN result of SFFL within such an extensive frequency range, and this is the highest output power of the near-SNL super-wideband SFFL. Furthermore, a linewidth of less than 0.8 kHz, a long-term stable polarization extinction ratio of 20 dB, and an optical signal-to-noise ratio of over 60 dB are obtained simultaneously. This start-of-the-art SFFL has provided a systematic solution for high-power and low-noise light sources, which is competitive for sophisticated applications, such as free-space laser communication, space-based gravitational wave detection, and super-long-distance space coherent velocity measurement and ranging.