Related Experiment Video
Updated: Jun 29, 2025

Fabrication Procedures and Birefringence Measurements for Designing Magnetically Responsive Lanthanide Ion Chelating Phospholipid Assemblies
Published on: January 3, 2018
Electrical feedback system for enhancing the RF power of photodetector
Abstract:
In this paper, we propose a system for enhancing the RF output power of the photodetector, especially the power of fundamental tune and second-order harmonic, by feeding back part of the RF signal through an electrical feedback circuit. As a result of bias modulation and opto-electric mixing, the RF output power can be effectively enhanced. The structure of uni-traveling carrier photodetector (UTC-PD) is employed in this work. With the RF enhancement system, the power of fundamental tune and second-order harmonic improve by 6.4 dB and 9.9 dB respectively, under the condition of 26 dBm input optical power, 3 V bias voltage, and 14 GHz input optical signal. Further, it was observed that third-order harmonic appeared under the influence of this system.
Related Concept Videos
Effects of feedback
Feedback significantly modifies the gain of a control system. The gain of a system without feedback is altered by a factor of one plus GH, where G represents...
Operational Amplifiers
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Clipper Circuit
The operation of a clipper circuit can be exemplified by analyzing a dual-clipper configuration setup that integrates two ideal diodes, each paired with a biasing...

