Highly stable mixed-phase Cs-Cu-I films with tunable optoelectronic properties for UVB photodetector applications

Ultraviolet (UV) photodetector plays an important role in military, civilian and people's daily life, and is an indispensable part of spectral detection. However, photodetectors target at the UVB region (280-320 nm) are rarely reported, and the devices detected by medium-wave UV light generally have problems such as low detection rate, low sensitivity, and poor stability, which are difficult to meet the market application needs. Herein, Cs-Cu-I films with mixed-phase have been prepared by vacuum thermal evaporation. By adjusting the proportion of evaporation sources (CsI and CuI), the optical bandgaps of mixed-phase Cs-Cu-I films can be tuned between 3.7 eV and 4.1 eV. This absorption cut-off edge is exactly at both ends of the UVB band, which indicating its potential application in the field of UVB detection. Finally, the photodetectors based on Cs-Cu-I/n-Si heterojunction are fabricated. The photodetector shows good spectral selectivity for UVB band, and has a photoresponsivity of 22 mA/W, a specific detectivity of 1.83*10¹¹ Jones, an EQE over 8.7% and an on/off ratio above 20.