Passive Self-Sustained Thermoelectric Devices Powering the 24 h Wireless Transmission via Radiation-Cooling and Selective Photothermal Conversion
Related Experiment Video
Updated: Jun 29, 2025

Asymmetric Thermoelectrochemical Cell for Harvesting Low-grade Heat under Isothermal Operation
Published on: February 5, 2020
Kai Liu1,2, Yaoguang Ma3,4, Yuzheng Li1
1State Key Laboratory of Silicon and Advanced Semiconductor Materials, and School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310058, China.
Abstract:
The rapid development of the Internet of Things has triggered a huge demand for self-sustained technology that can provide a continuous electricity supply for low-power electronics. Here, a self-sustained power supply solution is demonstrated that can produce a 24 h continuous and unipolar electricity output based on thermoelectric devices by harvesting the environmental temperature difference, which is ingeniously established utilizing radiation cooling and selective photothermal conversion. The developed prototype system can stably maintain a large temperature difference of about 1.8 K for a full day despite the real-time changes in environmental temperature and solar radiation, thereby driving continuous electricity output using the built-in thermoelectric device. Specifically, the large output voltage of >102 mV and the power density of >4.4 mW m-2 could be achieved for a full day, which are outstanding among the 24 h self-sustained thermoelectric devices and far higher than the start-up values of the wireless temperature sensor and also the light-emitting diode, enabling the 24 h remote data transmission and lighting, respectively. This work highlights the application prospects of self-sustained thermoelectric devices for low-power electronics.
Related Concept Videos
Mechanism of heat transfer
Absorption of Radiation
Radiation: Applications
The average...
Mechanisms of Heat Transfer II
Mechanisms of Heat Transfer I
Conduction, Convection and Radiation: Problem Solving
In order to solve a problem related to heat transfer, first of all, the situation needs to be examined to determine the type of heat transfer involved. This could...

