Related Experiment Video
Updated: Jun 29, 2025

The Portable Chemical Sterilizer PCS, D-FENS, and D-FEND ALL: Novel Chlorine Dioxide Decontamination Technologies for the Military
Published on: June 29, 2014
Highly effective decontamination in a hospital environment: An easy-to-operate, low-cost prototype
Clarice de la Rocha1, Carolina da Silva Canielles Caprara1, Vanice Rodrigues Poester2
1Laboratório de Desenvolvimento de Novos Fármacos (LADEFA), Universidade Federal do Rio Grande-FURG, Rio Grande, Rio Grande do Sul, Brazil.
Abstract:
Healthcare-associated infections (HAI) are illnesses acquired during healthcare and are often the most important adverse event during healthcare. With the aim of increasing the effectiveness of disinfection/decontamination processes in the health service with safe and not promote microbial resistance, we propose the development of portable equipment associated with type C ultraviolet light (UVC). The efficiency of the irradiance emitted by the equipment (at dosages 3.5, 5.0, and 60 mJ/cm2) was determined by the action exerted after exposure against four different bacterial (Acinetobacter baumannii, Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus) and three different fungi (Candida albicans, C. parapsilosis, and Aspergillus section Fumigati). It was possible to observe that all treatments were capable of inactivating the bacterial species evaluated (p < 0.05), causing the irreversible death of these microorganisms. The most effective elimination of fungal agents was at a dose of 60 mJ/cm2 of UVC radiation, with a decrease in the fungal inoculum varying between 94% and 100% in relation to the control without exposure. Thus, our study showed that the application of the portable prototype with UVC light (254 nm) at a distance of 48 mm, allowed an average irradiance of 3.5 mW/cm2, with doses of 3.5 ≈ 60 mJ/cm2 (from 1 to 60 s of exposure), which can promote the total reduction of the bacteria evaluated and significantly reduce fungal growth. Therefore, this prototype could be used safely and effectively in the hospital environment, considerably reducing contamination and contributing to the reduction of healthcare-associated infection risk.
Related Concept Videos
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Hand hygiene
Hand washing...
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...

