Enhancement of solar evacuated tube unit filled with nanofluid implementing three lobed storage unit equipped with...

This study discusses an evacuated tube collector-type solar water heater (ETCSWH) using a phase change material (PCM) chamber with fins, nanofluid, and nano-enhanced phase change material (NEPCM). First, the charging phenomena in a horizontal triplex tube heat exchanger (TTHX) equipped with fins, natural convection, and an ETCSWH system without PCM is simulated to validate the solution. The impact of adding fins and nanoparticles with a volume fraction of 3% of Al₂O₃ and Cu to paraffin wax and water-based fluid, respectively, on the unit's efficiency has been examined. The proposed system for the PCM melting process, heat storage, fluid flow behavior in the system, and velocity distribution and temperature contour in the storage tank and three parts of the absorber tube have been evaluated using ANSYS FLUENT software in a three-dimensional and transient simulation. The results show that Case 8 has improved by 39.7% compared to Case 1 and Case 4 by 5.2% compared to Case 1 within 4 h of the melting process. Also, Case 8 with a 43% and 6.4% shorter melting time than Cases 1 and 5 has the best performance and the greatest heat transfer rate. The productivity of the ETCSWH system is considerably enhanced by the use of fins, NEPCM, and nanofluid.