Amino-functionalized novel biosorbent for effective removal of fluoride from water: process optimization using

Dipankar Jena1, Anjan Kumar Bej2, Anil Kumar Giri3

  • 1Department of Chemistry, Fakir Mohan University, Vyasa Vihar, Balasore, Odisha, 756089, India. dipankarjena.chem@gmail.com.

Related Concept Videos

Bioremediation00:46

Bioremediation

Bioremediation is the use of prokaryotes, fungi, or plants to remove pollutants from the environment. This process has been used to remove harmful toxins in groundwater as a byproduct of agricultural run-off and also to clean up oil spills.
Microbial Bioremediation of Hydrocarbons01:26

Microbial Bioremediation of Hydrocarbons

Bioremediation is an environmentally sustainable process that employs living organisms—primarily microorganisms—to degrade or neutralize pollutants from contaminated environments. In oil spills and hydrocarbon pollution, bioremediation involves the use of hydrocarbon-degrading bacteria to transform toxic compounds into less harmful substances. This approach leverages natural microbial metabolic processes and is considered both cost-effective and ecologically favorable compared to physical or...
Microbial Wastewater Treatment01:30

Microbial Wastewater Treatment

Microbial communities in aquatic ecosystems play a key role in the natural breakdown of contaminants introduced through domestic and industrial effluents. Acting as biological catalysts, these microbes change and mineralize a wide range of organic and inorganic pollutants under different redox conditions.In oxygen-rich surface waters, aerobic heterotrophs lead organic matter breakdown, using oxygen as the terminal electron acceptor to efficiently oxidize substrates to carbon dioxide and water.
Microbial Fuel Cells01:23

Microbial Fuel Cells

Microbial fuel cells (MFCs) are bioelectrochemical devices that generate electricity by exploiting the metabolic processes of electrogenic bacteria. These systems provide a renewable energy source and serve as an innovative method for treating organic waste, such as wastewater.A typical MFC consists of two chambers: an anoxic (oxygen-free) compartment that houses the bacteria and an oxic (oxygen-rich) compartment that contains oxygen as the terminal electron acceptor. Many MFCs use proton...
iChip01:24

iChip

The cultivation of environmental microorganisms has long been hindered by the inability to replicate complex native conditions in vitro. The isolation chip (iChip) addresses this limitation by facilitating the growth of previously uncultivable microorganisms through in situ incubation. Designed for high-throughput microbial cultivation, the iChip comprises hundreds of microchambers, each capable of housing a single microbial cell. These microchambers are loaded with a mixture of molten agar and...
Biological Treatment of Effluent and Waste Water01:30

Biological Treatment of Effluent and Waste Water

Biological wastewater treatment relies on the metabolic activity of microorganisms to remove pollutants from sewage. In modern treatment systems, this process is organized into sequential stages that progressively reduce solid material, dissolved organic matter, and microbial contamination. Each stage plays a distinct role in improving water quality and preparing the effluent for safe discharge or reuse.Primary and Secondary TreatmentPrimary treatment is a physical process that removes large...