A study into how thickness, infrared intensity, and airflow affect drying kinetics, modeling, activation energy, and...

Drying is a widely recognized process that reduces the need for storage and shipping weight, keeps free water out of the product, and prolongs its shelf life. An infrared dryer was designed to dry apples under different drying conditions. Apple slices of 6-, 4-, and 2-mm thicknesses were dried at intensities 0.130, 0.225, and 0.341 W/cm² and airflow 1.0, 0.5, and 1.5 m/s. The dehydrating period was prolonged with higher airflow and shortened with higher infrared intensity (IR). The shortest dehydrating period was verified by 190 min at 0.341 W/cm², 0.5 m/s under 2 mm thickness. Increasing the sample thickness from 2 to 4 mm and then to 6 mm resulted in an 84% and 192% increase in drying time, respectively. Dehydrated apples had water activity values ranging from 0.30 to 0.40. The shrinkage ratio increased with an increase in infrared radiation intensity. However, it decreased with an increase in air velocity, while the rehydration ratio decreased with an increase in radiation intensity and increased with an increase in air velocity. Regarding total color change, apple slice thickness was a major factor. The effective diffusivities varied between 2.6 and 9.0 𝗑10^-10 m²/s under different drying conditions. The dehydrating curves of apples were best described by the model developed by Midilli et al.