Related Experiment Video

Updated: Jun 29, 2025

A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing
08:29

A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing

Published on: August 10, 2018

8.0K

Optimization of the Boundary Conditions of a Board Level Reliability Test Board to Maximize the Fatigue Life of Ball

Jisup Lee1, Hyunsik Jeong1, Gunhee Jang1

  • 1Department of Mechanical Convergence Engineering, Hanyang University, Seoul 04763, Republic of Korea.

Materials (Basel, Switzerland)
|April 9, 2024
PubMed

Keywords:
boundary conditionfatigue lifemulti-objective optimizationsolder joint

More Related Videos

Origami Inspired Self-assembly of Patterned and Reconfigurable Particles12:33

Origami Inspired Self-assembly of Patterned and Reconfigurable Particles

Published on: February 4, 2013

21.7K
Fabrication of Uniform Nanoscale Cavities via Silicon Direct Wafer Bonding10:32

Fabrication of Uniform Nanoscale Cavities via Silicon Direct Wafer Bonding

Published on: January 9, 2014

7.4K

Related Concept Videos

Fatigue01:21

Fatigue

Fatigue occurs when materials rupture under repeated or fluctuating loads, even at stress levels far below their static breaking strength. It typically results in brittle failure, even for ductile materials. It is a critical consideration in designing machines and structural components subjected to repetitive or varying loads. The nature of these loadings can range from fluctuating loads like unbalanced pump impellers causing vibrations to repeatedly bending a thin steel rod wire back and forth...
181
Yield Criteria for Ductile Materials under Plane Stress01:25

Yield Criteria for Ductile Materials under Plane Stress

In designing structural elements and machine parts using ductile materials, it is crucial to ensure that these components withstand applied stresses without yielding. Yielding is initially determined through a tensile test, which evaluates the material's response to uniaxial stress. However, tensile stress is insufficient when components face biaxial or plane stress conditions This condition requires advanced criteria to predict failure.
The Maximum Shearing Stress Criterion, also known as...
161
Saint-Venant's Principle01:18

Saint-Venant's Principle

The principle of Saint-Venant postulates that the stress distribution within a structural member does not rely on the precise method of load application except in the vicinity of the load application points. Consider a scenario where loads are centrally applied on two plates. In this case, the plates move toward each other without any rotation. This movement causes the member to contract in length and expand in width and thickness. Uniform deformation across all elements and maintaining...
593