The Mechanical Performance and Reaction Mechanism of Slag-Based Organic-Inorganic Composite Geopolymers

A series of organic-inorganic composite geopolymer paste samples were prepared with slag-based geopolymer and three types of hydrophilic organic polymers, i.e., PVA, PAA, and CPAM, by ordinary molding and pressure-mixing processes. The reaction mechanism between slag-based geopolymer and organic polymers was studied by FT-IR, NMR, and SEM techniques. The experimental results showed that the slag-based geopolymer with the addition of 3% PVA presented the highest 28-day flexural strength of 19.0 MPa by means of a pressure-mixing process and drying curing conditions (80 °C, 24 h) compared with the geopolymers incorporating PAA and CPAM. A more homogeneous dispersion morphology was also observed by BSE and SEM for the 3% PVA-incorporated slag-based geopolymer. The FT-IR testing results confirmed the formation of a C-O-Si (Al) bond between PVA and the slag-based geopolymer. The deconvolution of the Q³ and Q²(1Al) species obtained by ²⁹Si NMR testing manifested the addition of PVA and increased the length of the silicon backbone chain in the geopolymer. These findings confirmed that a composite geopolymer with high toughness can be produced based on the interpenetrating network structure formed between organic polymers and inorganic geopolymer.