Comparative analysis in selecting best irrigation method to maximize tomato yield from various irrigation approaches...

It is now essential for farmers to evaluate and compare different irrigation scheduling strategies in order to operate their irrigation systems in accordance with their resources and achievements. For tomato crops, a rigorous comparison was made between the yield of soil moisture and irrigation scheduling systems based on evapotranspiration. The experimental setup used a randomized complete block design (RCBD) with three replications, with water requirements of 100%, 75%, and 50%. Using a ReplogleBos-Clemmens (RBC) flume with an input rate of 1.62 l/s, water was applied to the furrows. The total applied amount in the Soil Moisture (SM) and Evapotranspiration (ET) based methods was 229.1 mm, and 280 mm, respectively. The collected data were assessed using ANOVA at a 5% significance level. For every technique, yield values, yield attributes, and agronomic traits were computed. The result indicates that there is no appreciable variation among the factors. The net yield advantage was highest at 75% SM and lowest at 25% SM. Furthermore, compared to the ET-based approach, it was demonstrated that the SM-based method conserved approximately 18.2% of irrigation water. As a result, when producing crops that require a lot of water, like tomatoes, in areas with limited water resources, SM-based irrigation scheduling is preferable to ET-based irrigation scheduling.