In Situ Polymerized Quasi-Solid Electrolytes Compounded with Ionic Liquid Empowering Long-Life Cycling of 4.45 V...

High-voltage resistant quasi-solid-state polymer electrolytes (QSPEs) are promising for enhancing the energy density of lithium-metal batteries in practice. However, side reactions occurring at the interfaces between the anodes or cathodes and QSPEs considerably reduce the lifespan of high-voltage LMBs. In this study, a copolymer of vinyl ethylene carbonate (VEC) and poly(ethylene glycol) diacrylate (PEGDA) was used as the framework, with a cellulose membrane (CE) as the supporting layer. Based on density functional theory calculations, 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (Pyr₁₄TFSI), an ionic liquid, was screened because of its lowest unoccupied molecular orbital energy level as a modifying agent for the in situ P(VEC_x-EG_y)/Pyr_z/LiTFSI@CE QSPEs synthesis. Pyr₁₄⁺, with a lithiophobic alkyl chain, forms a dense positive ion shielding layer on the protruding tips of deposited lithium, facilitating uniform and smooth lithium deposition. Pyr₁₄TFSI assists in constructing a stable solid electrolyte interphase (SEI) layer on the Li surface enriched with LiF, Li₃N, and RCOOLi. The modulation of lithium deposition behavior on the anode by Pyr₁₄TFSI ensures stable Li plating/stripping for >1500 h. A Li-Cu cell exhibits stable cycling for >200 cycles at a current density of 0.05 mA cm^-2, with an average Coulombic efficiency of 92.7%. In situ polymerization ensures that P(VEC_x-EG_y)/Pyr_z/LiTFSI@CE QSPEs exhibit excellent interface compatibility with the anode and the cathode. The CR2032 button cell Li|P(VEC₁-EG_0.06)/Pyr_0.4/LiTFSI@CE|LiCoO₂ demonstrates stable cycling with a negligible capacity decay of 0.083% per cycle for >390 cycles at 25 °C and 0.2 C when using a high-voltage LiCoO₂ (4.45 V) cathode. Furthermore, a 7.1 mAh pouch cell achieves stable charge-discharge cycles, confirming the pronounced stability of the as-fabricated QSPE at the interfaces of the high-voltage LiCoO₂ cathode and Li anode.