Modeling of Styl'One Evolution Correction Factors for Multicomponent Mixtures Scaling-up to Roller Compaction

Roll compaction (RC) is a cost-effective dry granulation method, widely implemented in the pharmaceutical industry. In early formulation development however, when the material availability is limited, being able to predict the most important parameters in RC, like gap width and specific compaction force (SCF), to obtain a target ribbon solid fraction (SF) would significantly improve the formulation development efficiency as it would avoid the need of performing experiments on the roller compactor itself. However, at the present state of things, experiments on RC mechanical simulators present an overestimation of the target SF, when compared to roller compactor SF values. Although numerous correction approaches have been developed to improve the predictive performance of different mathematical models applied to the simulation experimental results, no study has collected a database wide enough to demonstrate the validity of a correction factor that allows to accurately simulate the compaction behavior of multicomponent mixtures. Here, 25 different formulations at 40 % drug load are compacted at different SCFs, both on a RC mimicking device (Styl'One Evolution) and on an actual roller compactor (Gerteis Mini-Pactor): following a similar approach as Reimer et al. and implementing a simplified version of the Johanson's mathematical model, 4 different correction factors are calculated, depending on how their material properties and pressure dependencies are considered. In conclusion, one correction factor is identified as the optimal trade-off between the SF prediction accuracy on the Gerteis Mini-Pactor and its applicability to a wide range of formulations, as it is independent of the material properties. This finding is particularly relevant when applied to scale-up to this specific roller compactor or early development processes of new formulations that have not been mechanically characterized yet.